Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe

Chen Ye; Zheng Nenghong; Yang Rui; Xia Fengbing; Liu Tao; Huang Renjie; Chai Lijun

doi:doi:10.11648/j.jenr.20231201.11

| Peer-Reviewed

Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe

Chen Ye, Zheng Nenghong, Yang Rui, Xia Fengbing, Liu Tao, Huang Renjie, Chai Lijun

Published in Journal of Energy and Natural Resources (Volume 12, Issue 1)

Received: 17 March 2023 Accepted: 6 May 2023 Published: 18 May 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The “four tubes” safety of the boiler is related to the economic and safe operation of the boiler. In order to ensure the safety of boiler steam pipe large diameter nozzle welding place, the structural stress analysis of the special large-aperture nozzle pipeline designed in a boiler enterprise's design process is studied in this paper. In the case, the allowable angle of the pipeline exceeds the direct calculation range of JB4732-1995, therefore, the ANSYS finite element analysis method is used to calculate the structural stress of the pipeline, and the stress evaluation is carried out. The results show that the finite element method can effectively calculate the pipeline structure's stress calculation. In order to meet the requirements of JB 4732-1995 for the evaluation of various types of stress intensity step by step, the film bending stress is treated as S_III, and the conservative treatment is controlled by 1.5Sm, therefore, the finite element analysis results of the pipeline show that the maximum equivalent stress is 176.22 MPa, which is located at the connection between the large nozzle and the main pipe, and the larger the diameter of the pipe nozzle, the higher the equivalent stress. The stress evaluation results of the pipeline are evaluated according to the third stress intensity, and the strength of the analyzed parts meets the standard requirements.

Published in	Journal of Energy and Natural Resources (Volume 12, Issue 1)
DOI	10.11648/j.jenr.20231201.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2023. Published by Science Publishing Group

Keywords

Large Aperture Takeover, Finite Element Method, Stress Analysis, Stress Evaluation

References

[1]	Bian Xiaoke. Failure analysis and life prediction of main steam pipelines [J]. Building materials and decoration, 2016, No. 419 (15): 165-6. (in Chinese)
[2]	Wei Shengjun, Li Fufu, Qi Chang. Crack problems and prevention in inspection of boilers, pressure vessels and pressure pipelines [J]. Science and information technology, 2023, (2): 16-8. (in Chinese)
[3]	Salifu S, Desai D, Kok S. Influence of Diverse Operating Cycles on the Useful Creep Life of P92 Steam Piping [J]. Journal of Failure Analysis and Prevention, 2021, 21 (3): 983-92.
[4]	Murakami K, Komazaki S-I, Mitsueda T. Creep Remaining-Life Assessment of 2.25Cr-1Mo Steel Hot Reheat Steam Piping by Small Punch Test [J]. Tetsu-to-Hagane, 2022, 108 (1): 88-96.
[5]	Chen Xingyang, Zhou Yang, Song Junjun, et al. Remaining Life Assessment of Main Steam Piping in Long-term High Temperature Service Power Plant [J]. Physical and Chemical Inspection-Physical Volume, 2023, 59 (01): 13-5+38. (in Chinese)
[6]	SToresund J, Andersson D, Rantala J, et al. Creep analysis of a main steam pipe system [J]. Materials at High Temperatures, 2022, 39 (6): 678-88.
[7]	GRIN’ E A, STEPANOV V V, SARKISYAN V A, et al. Method for evaluating the technical state of boilers and piping in thermal power plants [J]. Power Technology and Engineering, 2012, 45 (5): 369-75.
[8]	Choi W, Han J. Health-Monitoring Methodology for High-Temperature Steam Pipes of Power Plants Using Real-Time Displacement Data [J]. Applied Sciences, 2021, 11 (5).
[9]	Pástor M, Lengvarský P, TREBUŇA F, et al. Prediction of failures in steam boiler using quantification of residual stresses [J]. Engineering Failure Analysis, 2020, 118.
[10]	Qi Haifeng. Causes and prevention of cracks in boiler main steam pipeline [J]. Labor protection, 2021, (8): 80-1. (in Chinese)
[11]	Liu Cong, Shen Liang, Lu He. Steam pipe stress calculation and support selection of 220t / h boiler [J]. Power plant system engineering, 2021, 37 (04): 47-8 + 50. (in Chinese)
[12]	Lyu Y, Lian w, Sun z, et al. Failure Analysis of Abnormal Bulging and Cracking for High-Pressure Steam Pipe [J]. Journal of Materials Engineering and Performance, 2022, 31 (9): 7277-89.
[13]	JB4732-1995, Steel Pressure Vessels, Design by Analysis, 2005. (in Chinese)
[14]	GB 150.3-2011, Pressure Vessel Part 3: Design. (in Chinese)
[15]	GB/T 16507-2022, Water Pipe Boiler. (in Chinese)

Cite This Article

Plain Text BibTeX RIS

APA Style

Chen Ye, Zheng Nenghong, Yang Rui, Xia Fengbing, Liu Tao, et al. (2023). Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. Journal of Energy and Natural Resources, 12(1), 1-6. https://doi.org/10.11648/j.jenr.20231201.11

Copy | Download

ACS Style

Chen Ye; Zheng Nenghong; Yang Rui; Xia Fengbing; Liu Tao, et al. Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. J. Energy Nat. Resour. 2023, 12(1), 1-6. doi: 10.11648/j.jenr.20231201.11

Copy | Download

AMA Style

Chen Ye, Zheng Nenghong, Yang Rui, Xia Fengbing, Liu Tao, et al. Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. J Energy Nat Resour. 2023;12(1):1-6. doi: 10.11648/j.jenr.20231201.11

Copy | Download

@article{10.11648/j.jenr.20231201.11,
  author = {Chen Ye and Zheng Nenghong and Yang Rui and Xia Fengbing and Liu Tao and Huang Renjie and Chai Lijun},
  title = {Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe},
  journal = {Journal of Energy and Natural Resources},
  volume = {12},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.jenr.20231201.11},
  url = {https://doi.org/10.11648/j.jenr.20231201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20231201.11},
  abstract = {The “four tubes” safety of the boiler is related to the economic and safe operation of the boiler. In order to ensure the safety of boiler steam pipe large diameter nozzle welding place, the structural stress analysis of the special large-aperture nozzle pipeline designed in a boiler enterprise's design process is studied in this paper. In the case, the allowable angle of the pipeline exceeds the direct calculation range of JB4732-1995, therefore, the ANSYS finite element analysis method is used to calculate the structural stress of the pipeline, and the stress evaluation is carried out. The results show that the finite element method can effectively calculate the pipeline structure's stress calculation. In order to meet the requirements of JB 4732-1995 for the evaluation of various types of stress intensity step by step, the film bending stress is treated as SIII, and the conservative treatment is controlled by 1.5Sm, therefore, the finite element analysis results of the pipeline show that the maximum equivalent stress is 176.22 MPa, which is located at the connection between the large nozzle and the main pipe, and the larger the diameter of the pipe nozzle, the higher the equivalent stress. The stress evaluation results of the pipeline are evaluated according to the third stress intensity, and the strength of the analyzed parts meets the standard requirements.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe
AU  - Chen Ye
AU  - Zheng Nenghong
AU  - Yang Rui
AU  - Xia Fengbing
AU  - Liu Tao
AU  - Huang Renjie
AU  - Chai Lijun
Y1  - 2023/05/18
PY  - 2023
N1  - https://doi.org/10.11648/j.jenr.20231201.11
DO  - 10.11648/j.jenr.20231201.11
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20231201.11
AB  - The “four tubes” safety of the boiler is related to the economic and safe operation of the boiler. In order to ensure the safety of boiler steam pipe large diameter nozzle welding place, the structural stress analysis of the special large-aperture nozzle pipeline designed in a boiler enterprise's design process is studied in this paper. In the case, the allowable angle of the pipeline exceeds the direct calculation range of JB4732-1995, therefore, the ANSYS finite element analysis method is used to calculate the structural stress of the pipeline, and the stress evaluation is carried out. The results show that the finite element method can effectively calculate the pipeline structure's stress calculation. In order to meet the requirements of JB 4732-1995 for the evaluation of various types of stress intensity step by step, the film bending stress is treated as SIII, and the conservative treatment is controlled by 1.5Sm, therefore, the finite element analysis results of the pipeline show that the maximum equivalent stress is 176.22 MPa, which is located at the connection between the large nozzle and the main pipe, and the larger the diameter of the pipe nozzle, the higher the equivalent stress. The stress evaluation results of the pipeline are evaluated according to the third stress intensity, and the strength of the analyzed parts meets the standard requirements.
VL  - 12
IS  - 1
ER  -

Copy | Download

Author Information

Chen Ye

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Zheng Nenghong

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Yang Rui

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Xia Fengbing

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Liu Tao

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Huang Renjie

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China
Chai Lijun

College of Mechanical Engineering, Sichuan University of Science and Engineering, Yibing, People’s Republic of China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Chen Ye, Zheng Nenghong, Yang Rui, Xia Fengbing, Liu Tao, et al. (2023). Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. Journal of Energy and Natural Resources, 12(1), 1-6. https://doi.org/10.11648/j.jenr.20231201.11

Copy | Download

ACS Style

Chen Ye; Zheng Nenghong; Yang Rui; Xia Fengbing; Liu Tao, et al. Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. J. Energy Nat. Resour. 2023, 12(1), 1-6. doi: 10.11648/j.jenr.20231201.11

Copy | Download

AMA Style

Chen Ye, Zheng Nenghong, Yang Rui, Xia Fengbing, Liu Tao, et al. Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe. J Energy Nat Resour. 2023;12(1):1-6. doi: 10.11648/j.jenr.20231201.11

Copy | Download

@article{10.11648/j.jenr.20231201.11,
  author = {Chen Ye and Zheng Nenghong and Yang Rui and Xia Fengbing and Liu Tao and Huang Renjie and Chai Lijun},
  title = {Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe},
  journal = {Journal of Energy and Natural Resources},
  volume = {12},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.jenr.20231201.11},
  url = {https://doi.org/10.11648/j.jenr.20231201.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20231201.11},
  abstract = {The “four tubes” safety of the boiler is related to the economic and safe operation of the boiler. In order to ensure the safety of boiler steam pipe large diameter nozzle welding place, the structural stress analysis of the special large-aperture nozzle pipeline designed in a boiler enterprise's design process is studied in this paper. In the case, the allowable angle of the pipeline exceeds the direct calculation range of JB4732-1995, therefore, the ANSYS finite element analysis method is used to calculate the structural stress of the pipeline, and the stress evaluation is carried out. The results show that the finite element method can effectively calculate the pipeline structure's stress calculation. In order to meet the requirements of JB 4732-1995 for the evaluation of various types of stress intensity step by step, the film bending stress is treated as SIII, and the conservative treatment is controlled by 1.5Sm, therefore, the finite element analysis results of the pipeline show that the maximum equivalent stress is 176.22 MPa, which is located at the connection between the large nozzle and the main pipe, and the larger the diameter of the pipe nozzle, the higher the equivalent stress. The stress evaluation results of the pipeline are evaluated according to the third stress intensity, and the strength of the analyzed parts meets the standard requirements.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Stress Analysis of Large Diameter Pipe Interface Structure of Boiler Main Steam Pipe
AU  - Chen Ye
AU  - Zheng Nenghong
AU  - Yang Rui
AU  - Xia Fengbing
AU  - Liu Tao
AU  - Huang Renjie
AU  - Chai Lijun
Y1  - 2023/05/18
PY  - 2023
N1  - https://doi.org/10.11648/j.jenr.20231201.11
DO  - 10.11648/j.jenr.20231201.11
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20231201.11
AB  - The “four tubes” safety of the boiler is related to the economic and safe operation of the boiler. In order to ensure the safety of boiler steam pipe large diameter nozzle welding place, the structural stress analysis of the special large-aperture nozzle pipeline designed in a boiler enterprise's design process is studied in this paper. In the case, the allowable angle of the pipeline exceeds the direct calculation range of JB4732-1995, therefore, the ANSYS finite element analysis method is used to calculate the structural stress of the pipeline, and the stress evaluation is carried out. The results show that the finite element method can effectively calculate the pipeline structure's stress calculation. In order to meet the requirements of JB 4732-1995 for the evaluation of various types of stress intensity step by step, the film bending stress is treated as SIII, and the conservative treatment is controlled by 1.5Sm, therefore, the finite element analysis results of the pipeline show that the maximum equivalent stress is 176.22 MPa, which is located at the connection between the large nozzle and the main pipe, and the larger the diameter of the pipe nozzle, the higher the equivalent stress. The stress evaluation results of the pipeline are evaluated according to the third stress intensity, and the strength of the analyzed parts meets the standard requirements.
VL  - 12
IS  - 1
ER  -

Copy | Download