Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City

Ishai Oliker; Robert Kremer; Dmitry Chernyy

doi:doi:10.11648/j.jenr.20211004.13

| Peer-Reviewed

Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City

Ishai Oliker, Robert Kremer, Dmitry Chernyy

Published in Journal of Energy and Natural Resources (Volume 10, Issue 4)

Received: 18 June 2021 Accepted: 29 June 2021 Published: 24 December 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The Fisonic Devices (FD)s are supersonic, condensing heat pumps with a patented internal geometry that causes steam and water to mix and accelerate, converting a minute fraction of fluid’s thermal energy to physical trust (pump head) with the outlet pressure higher than the pressure of the working medium at the inlet of the FD. The FD replaces the tube and shell heat exchanger and heats the water by direct contact with steam. The use of the FD allows reducing the terminal temperature difference between steam and water, the required steam consumption, and the amount of cold potable water required to quench the condensate. The operation of the Fisonic system results in reduction of building steam, cold water and sewer costs. The purpose of the described project was to manufacture, install, test, and demonstrate the performance and energy efficiency of the FD’s for the space heating system of the major City of New York steam consumer - Woolworth building. The test of FD’s resulted in reduction of the annual steam supply in comparison with the existing system by 20%, elimination of cold quench water consumption, and reduction of steam, water, and sewer costs.

Published in	Journal of Energy and Natural Resources (Volume 10, Issue 4)
DOI	10.11648/j.jenr.20211004.13
Page(s)	89-95
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Fisonic Pump, Fisonic Device, Heat Exchanger, Steam Saver

References

[1]	Oliker, I and Kremer, R. Applications of Fisonic Devices, Engineering Systems, Sept. 2019.
[2]	Fisenko, V. V. Critical two-phase flow systems, Moscow, Atomizdat, 1978.
[3]	Fisenko, V. V., Some special features of the formation of gas-liquid mixtures. Journal of Physical Chemistry, 1979, №12.
[4]	Fisenko, V. V., On the boundary of inversion of the speed of sound in gases. USSR Academy of Science, Power Engineering and Transport, 1981, №4.
[5]	Fisenko, V. V. and Marchenko G. G., On one phenomenon idea of fluid solutions and analysis of acoustic method. Acoustics and Ultrasonic’s. Kiev, Technology, 1981. № 16.
[6]	Fisenco, V. V. The Fisonic Energy Device. Joint Power Conference. Minneapolis, MN. October 1999.
[7]	Sokolov, E. Ya. and Zinger, N. M. Jet Apparatus. Energoatomizdat, Moscow, 1989.
[8]	Fisenco, V. V. Heat-Generating Fisonic Devices for Heating of Pumped or Injected Medium.
[9]	US Patent 8,104,745 B1 Dated January 31, 2012.
[10]	Fisenko, V. V. New Energy Conservation Technology for Space Heating and Domestic water. Teploenergetica, No. 1, 2000.
[11]	Fisenko, V. V., Some Principles of Theory and Practical Use of Fisonic Devices and Technologies”. Article, located on the site of the Ministry of Power Engineering of the Russian Federation. www.mte.gov.ru.
[12]	Fisenko, V. V. and Sychikov, V. I., On the compressibility effect on the hydrodynamics of two-phase flows. Journal of Physical Engineering, 1977. V. 32, №6.
[13]	Oliker, I. Power Plant Cycles with Multiple Direct Contact Heaters. Power Magazine. April 2020.
[14]	CUNY Building Performance Laboratory. Testing of Fisonic Device for Domestic Hot Water at 455 Broadway Building. Prepared for DCAS City of New York Clean Energy & Innovative Technologies. January 2019. NYC Department of Citywide Administrative Services RFI: Regarding Innovative Technologies for HVAC Optimization, PIN #: 85616RFI002.
[15]	Underwriters Laboratory Certification 4WY4 Heat Exchanger, MN48320.

Cite This Article

Plain Text BibTeX RIS

APA Style

Ishai Oliker, Robert Kremer, Dmitry Chernyy. (2021). Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. Journal of Energy and Natural Resources, 10(4), 89-95. https://doi.org/10.11648/j.jenr.20211004.13

Copy | Download

ACS Style

Ishai Oliker; Robert Kremer; Dmitry Chernyy. Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. J. Energy Nat. Resour. 2021, 10(4), 89-95. doi: 10.11648/j.jenr.20211004.13

Copy | Download

AMA Style

Ishai Oliker, Robert Kremer, Dmitry Chernyy. Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. J Energy Nat Resour. 2021;10(4):89-95. doi: 10.11648/j.jenr.20211004.13

Copy | Download

@article{10.11648/j.jenr.20211004.13,
  author = {Ishai Oliker and Robert Kremer and Dmitry Chernyy},
  title = {Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City},
  journal = {Journal of Energy and Natural Resources},
  volume = {10},
  number = {4},
  pages = {89-95},
  doi = {10.11648/j.jenr.20211004.13},
  url = {https://doi.org/10.11648/j.jenr.20211004.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20211004.13},
  abstract = {The Fisonic Devices (FD)s are supersonic, condensing heat pumps with a patented internal geometry that causes steam and water to mix and accelerate, converting a minute fraction of fluid’s thermal energy to physical trust (pump head) with the outlet pressure higher than the pressure of the working medium at the inlet of the FD. The FD replaces the tube and shell heat exchanger and heats the water by direct contact with steam. The use of the FD allows reducing the terminal temperature difference between steam and water, the required steam consumption, and the amount of cold potable water required to quench the condensate. The operation of the Fisonic system results in reduction of building steam, cold water and sewer costs. The purpose of the described project was to manufacture, install, test, and demonstrate the performance and energy efficiency of the FD’s for the space heating system of the major City of New York steam consumer - Woolworth building. The test of FD’s resulted in reduction of the annual steam supply in comparison with the existing system by 20%, elimination of cold quench water consumption, and reduction of steam, water, and sewer costs.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City
AU  - Ishai Oliker
AU  - Robert Kremer
AU  - Dmitry Chernyy
Y1  - 2021/12/24
PY  - 2021
N1  - https://doi.org/10.11648/j.jenr.20211004.13
DO  - 10.11648/j.jenr.20211004.13
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 89
EP  - 95
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20211004.13
AB  - The Fisonic Devices (FD)s are supersonic, condensing heat pumps with a patented internal geometry that causes steam and water to mix and accelerate, converting a minute fraction of fluid’s thermal energy to physical trust (pump head) with the outlet pressure higher than the pressure of the working medium at the inlet of the FD. The FD replaces the tube and shell heat exchanger and heats the water by direct contact with steam. The use of the FD allows reducing the terminal temperature difference between steam and water, the required steam consumption, and the amount of cold potable water required to quench the condensate. The operation of the Fisonic system results in reduction of building steam, cold water and sewer costs. The purpose of the described project was to manufacture, install, test, and demonstrate the performance and energy efficiency of the FD’s for the space heating system of the major City of New York steam consumer - Woolworth building. The test of FD’s resulted in reduction of the annual steam supply in comparison with the existing system by 20%, elimination of cold quench water consumption, and reduction of steam, water, and sewer costs.
VL  - 10
IS  - 4
ER  -

Copy | Download

Author Information

Ishai Oliker

Joseph Technology Corporation, Montvale, USA
Robert Kremer

Hudson Fisonic Corporation, New York, USA
Dmitry Chernyy

Hudson Fisonic Corporation, New York, USA

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Ishai Oliker, Robert Kremer, Dmitry Chernyy. (2021). Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. Journal of Energy and Natural Resources, 10(4), 89-95. https://doi.org/10.11648/j.jenr.20211004.13

Copy | Download

ACS Style

Ishai Oliker; Robert Kremer; Dmitry Chernyy. Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. J. Energy Nat. Resour. 2021, 10(4), 89-95. doi: 10.11648/j.jenr.20211004.13

Copy | Download

AMA Style

Ishai Oliker, Robert Kremer, Dmitry Chernyy. Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City. J Energy Nat Resour. 2021;10(4):89-95. doi: 10.11648/j.jenr.20211004.13

Copy | Download

@article{10.11648/j.jenr.20211004.13,
  author = {Ishai Oliker and Robert Kremer and Dmitry Chernyy},
  title = {Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City},
  journal = {Journal of Energy and Natural Resources},
  volume = {10},
  number = {4},
  pages = {89-95},
  doi = {10.11648/j.jenr.20211004.13},
  url = {https://doi.org/10.11648/j.jenr.20211004.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20211004.13},
  abstract = {The Fisonic Devices (FD)s are supersonic, condensing heat pumps with a patented internal geometry that causes steam and water to mix and accelerate, converting a minute fraction of fluid’s thermal energy to physical trust (pump head) with the outlet pressure higher than the pressure of the working medium at the inlet of the FD. The FD replaces the tube and shell heat exchanger and heats the water by direct contact with steam. The use of the FD allows reducing the terminal temperature difference between steam and water, the required steam consumption, and the amount of cold potable water required to quench the condensate. The operation of the Fisonic system results in reduction of building steam, cold water and sewer costs. The purpose of the described project was to manufacture, install, test, and demonstrate the performance and energy efficiency of the FD’s for the space heating system of the major City of New York steam consumer - Woolworth building. The test of FD’s resulted in reduction of the annual steam supply in comparison with the existing system by 20%, elimination of cold quench water consumption, and reduction of steam, water, and sewer costs.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Testing of Energy Efficient Fisonic Devices at the Woolworth Building in New York City
AU  - Ishai Oliker
AU  - Robert Kremer
AU  - Dmitry Chernyy
Y1  - 2021/12/24
PY  - 2021
N1  - https://doi.org/10.11648/j.jenr.20211004.13
DO  - 10.11648/j.jenr.20211004.13
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 89
EP  - 95
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20211004.13
AB  - The Fisonic Devices (FD)s are supersonic, condensing heat pumps with a patented internal geometry that causes steam and water to mix and accelerate, converting a minute fraction of fluid’s thermal energy to physical trust (pump head) with the outlet pressure higher than the pressure of the working medium at the inlet of the FD. The FD replaces the tube and shell heat exchanger and heats the water by direct contact with steam. The use of the FD allows reducing the terminal temperature difference between steam and water, the required steam consumption, and the amount of cold potable water required to quench the condensate. The operation of the Fisonic system results in reduction of building steam, cold water and sewer costs. The purpose of the described project was to manufacture, install, test, and demonstrate the performance and energy efficiency of the FD’s for the space heating system of the major City of New York steam consumer - Woolworth building. The test of FD’s resulted in reduction of the annual steam supply in comparison with the existing system by 20%, elimination of cold quench water consumption, and reduction of steam, water, and sewer costs.
VL  - 10
IS  - 4
ER  -

Copy | Download