Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors

Yodgor Аkbarovich Yusupov; Оybek Hamdamovich Оtaqulov; Sirojiddin Fayozovich Ergashev; Аkmal Аhmadaliyevich Kuchkarov

doi:doi:10.11648/j.ijrse.20211001.15

| Peer-Reviewed

Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors

Yodgor Аkbarovich Yusupov, Оybek Hamdamovich Оtaqulov, Sirojiddin Fayozovich Ergashev, Аkmal Аhmadaliyevich Kuchkarov

Published in International Journal of Sustainable and Green Energy (Volume 10, Issue 1)

Received: 4 March 2021 Accepted: 19 March 2021 Published: 30 March 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In the manufacture, assembly, testing and operation of solar power plants, one has to deal with a wide variety of control and measuring operations, as well as means of control and measurement of physical quantities. Analysis of methods and means of control of solar parabolic trough installations showed that they are numerous and time consuming. This requires the development of modern automated systems for measuring, recording and processing the results of the energy characteristics of solar installations. This article describes an automated stand for measuring the thermal and energy characteristics of solar parabolic trough collectors. The developed experimental setup consists of a parabolic trough collector, a measuring tank, a converter, a meter, a level gauge, temperature sensors and electric valves. Consumption (energy generated) is measured with a graduated water tank. By measuring the volume of water and the temperature passed through the solar collector, you can estimate its efficiency. Several portions of heated water are collected in the measuring tank, depending on the intensity of the heating process. As the graduated tank fills, the digital output level gauge opens the electrical drain valve. On the basis of statistical processing of experimental data, the energy characteristics of the solar parabolic trough installation are determined.

Published in	International Journal of Sustainable and Green Energy (Volume 10, Issue 1)
DOI	10.11648/j.ijrse.20211001.15
Page(s)	28-31
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Parabolic Trough Collector, Concentration, Aperture, Receiver, Converter, Sensor

References

[1]	K. Lovegrove, and W. Stein, Concentrating Solar Power Technology. Principles, Developments and Applications, 1st ed., Vol. 21 of Woodhead Publishing Series in Energy, Cambridge: Woodhead, 2012.
[2]	Amir Shahsavari, Morteza Akbari. Potential of solar energy in developing countries for reducing energy-related emissions // Renewable and Sustainable Energy Reviews Volume 90, July 2018, Pages 275-291. https://doi.org/10.1016/j.rser.2018.03.065
[3]	L. Valenzuela, et al. Optical and thermal performance of large-size parabolic-trough solar collectors from outdoor experiments: A test method and a case study / Energy 70 (2014) 456-464. https://doi.org/10.1016/j.energy.2014.04.016
[4]	G. K. Manikandanetal, Enhancing the optical and thermal efficiency of a parabolic trough collector–A review // Applied Energy 235 (2019) 1524–1540. https://doi.org/10.1016/j.apenergy.2018.11.048
[5]	Hamzeh Jamali. Investigation and review of mirrors reflectance in parabolic trough solar collectors (PTSCs) /Energy Reports 5 (2019) 145–158. https://doi.org/10.1016/j.egyr. 2019.01.006
[6]	A. A. Abdurakhmanov, A. A. Kuchkarov, M. A. Mamatkosimov, et al. The optimization of the optical-geometric characteristics of mirror concentrating systems. Appl. Sol. Energy 50, 244–251 (2014). https://doi.org/10.3103/S0003701X14040033
[7]	Z. Zhao, et al. Experimental study of pin finned receiver tubes for a parabolic trough solar air collector // Solar Energy 207 (2020) 91–102. https://doi.org/10.1016/j.solener.2020.06.070
[8]	R. A. Zakhidov, Sh. I. Klychev, Maximum concentrating power of parabolic trough mirrors, Appl. Solar Energy, 1993, vol. 29, no. 4, pp. 56–58.
[9]	М. М. Muhitdinov, S. F. Ergashev, Solnechnye parabolotsilindricheskie ustanovki, Tashkent: Fan. 1995, 208 p.
[10]	A. Kuchkarov, et al. Calculation of Thermal and Exergy Efficiency of Solar Power Units with Linear Radiation Concentrators // Applied Solar Energy, 2020, Vol. 56, No. 1, pp. 42–46. DOI: 10.3103/S0003701X20010089.
[11]	REN21. Renewable Energy Policy Network. 2005. "Renewables 2005 Global Status Report/'Washington, DC: Worldwatch 1. stitute. www.ren21.net.
[12]	O. S. Popel, Effektivnost primeneniya solnechnih vodonagrevateley v klimaticheskih usloviyah sredney polosi Rossii // Energosberejenie №1. 2001.
[13]	V. I. Vissarionov, S. V. Belkina, G. V. Deryugina, V. A. Kuznetsova, N. K. Malinin, Energeticheskoye oborudovaniye dlya ispolzovaniya netraditsionnih i vozobnavlyayemih istochnikov energii. Spravochnik. Pod red. V. I. Vissarionova. М. 2004. 448p.
[14]	А. А. Kuchkarov, Lineino-kontsentriruyushie sistemy solnechnogo izlucheniya (Solnechnye kontsentratory energeticheskogo naznacheniya), Palmarium Academic Publishing, 2019. https://www.amazon.com/Lineino-kontsentriruyushchie-sistemy-solnechnogo-izlucheniya-energeticheskogo/dp/6202383577.
[15]	S. F. Ergashev, О. H. Оtaqulov, S. М. Аbdurahmonov, Yo. А. Yusupov, Avtomatizirovanniy stend dlya izmereniy, registratsii i obrabotki rezultatov energeticheskih harakteristik solnechnih parabolotsilindricheskih ustanovok. Materiali V mejdunarodnoy konferensii "Opticheskie i fotoelektricheskie yavleniya v poluprovodnikovih mikro- i nanostrukturah", Fergana, 2020, pp. 363-366.

Cite This Article

Plain Text BibTeX RIS

APA Style

Yodgor Аkbarovich Yusupov, Оybek Hamdamovich Оtaqulov, Sirojiddin Fayozovich Ergashev, Аkmal Аhmadaliyevich Kuchkarov. (2021). Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. International Journal of Sustainable and Green Energy, 10(1), 28-31. https://doi.org/10.11648/j.ijrse.20211001.15

Copy | Download

ACS Style

Yodgor Аkbarovich Yusupov; Оybek Hamdamovich Оtaqulov; Sirojiddin Fayozovich Ergashev; Аkmal Аhmadaliyevich Kuchkarov. Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. Int. J. Sustain. Green Energy 2021, 10(1), 28-31. doi: 10.11648/j.ijrse.20211001.15

Copy | Download

AMA Style

Yodgor Аkbarovich Yusupov, Оybek Hamdamovich Оtaqulov, Sirojiddin Fayozovich Ergashev, Аkmal Аhmadaliyevich Kuchkarov. Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. Int J Sustain Green Energy. 2021;10(1):28-31. doi: 10.11648/j.ijrse.20211001.15

Copy | Download

@article{10.11648/j.ijrse.20211001.15,
  author = {Yodgor Аkbarovich Yusupov and Оybek Hamdamovich Оtaqulov and Sirojiddin Fayozovich Ergashev and Аkmal Аhmadaliyevich Kuchkarov},
  title = {Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {10},
  number = {1},
  pages = {28-31},
  doi = {10.11648/j.ijrse.20211001.15},
  url = {https://doi.org/10.11648/j.ijrse.20211001.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20211001.15},
  abstract = {In the manufacture, assembly, testing and operation of solar power plants, one has to deal with a wide variety of control and measuring operations, as well as means of control and measurement of physical quantities. Analysis of methods and means of control of solar parabolic trough installations showed that they are numerous and time consuming. This requires the development of modern automated systems for measuring, recording and processing the results of the energy characteristics of solar installations. This article describes an automated stand for measuring the thermal and energy characteristics of solar parabolic trough collectors. The developed experimental setup consists of a parabolic trough collector, a measuring tank, a converter, a meter, a level gauge, temperature sensors and electric valves. Consumption (energy generated) is measured with a graduated water tank. By measuring the volume of water and the temperature passed through the solar collector, you can estimate its efficiency. Several portions of heated water are collected in the measuring tank, depending on the intensity of the heating process. As the graduated tank fills, the digital output level gauge opens the electrical drain valve. On the basis of statistical processing of experimental data, the energy characteristics of the solar parabolic trough installation are determined.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors
AU  - Yodgor Аkbarovich Yusupov
AU  - Оybek Hamdamovich Оtaqulov
AU  - Sirojiddin Fayozovich Ergashev
AU  - Аkmal Аhmadaliyevich Kuchkarov
Y1  - 2021/03/30
PY  - 2021
N1  - https://doi.org/10.11648/j.ijrse.20211001.15
DO  - 10.11648/j.ijrse.20211001.15
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 28
EP  - 31
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20211001.15
AB  - In the manufacture, assembly, testing and operation of solar power plants, one has to deal with a wide variety of control and measuring operations, as well as means of control and measurement of physical quantities. Analysis of methods and means of control of solar parabolic trough installations showed that they are numerous and time consuming. This requires the development of modern automated systems for measuring, recording and processing the results of the energy characteristics of solar installations. This article describes an automated stand for measuring the thermal and energy characteristics of solar parabolic trough collectors. The developed experimental setup consists of a parabolic trough collector, a measuring tank, a converter, a meter, a level gauge, temperature sensors and electric valves. Consumption (energy generated) is measured with a graduated water tank. By measuring the volume of water and the temperature passed through the solar collector, you can estimate its efficiency. Several portions of heated water are collected in the measuring tank, depending on the intensity of the heating process. As the graduated tank fills, the digital output level gauge opens the electrical drain valve. On the basis of statistical processing of experimental data, the energy characteristics of the solar parabolic trough installation are determined.
VL  - 10
IS  - 1
ER  -

Copy | Download

Author Information

Yodgor Аkbarovich Yusupov

Natural Disciplines, Computer Engineering, Fergana Branch of Tashkent University of Information Technologies, Fergana, Uzbekistan
Оybek Hamdamovich Оtaqulov

Intelligent Engineering Systems, Energy, Fergana Polytechnic Institute, Fergana, Uzbekistan
Sirojiddin Fayozovich Ergashev

Intelligent Engineering Systems, Energy, Fergana Polytechnic Institute, Fergana, Uzbekistan
Аkmal Аhmadaliyevich Kuchkarov

Intelligent Engineering Systems, Energy, Fergana Polytechnic Institute, Fergana, Uzbekistan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Yodgor Аkbarovich Yusupov, Оybek Hamdamovich Оtaqulov, Sirojiddin Fayozovich Ergashev, Аkmal Аhmadaliyevich Kuchkarov. (2021). Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. International Journal of Sustainable and Green Energy, 10(1), 28-31. https://doi.org/10.11648/j.ijrse.20211001.15

Copy | Download

ACS Style

Yodgor Аkbarovich Yusupov; Оybek Hamdamovich Оtaqulov; Sirojiddin Fayozovich Ergashev; Аkmal Аhmadaliyevich Kuchkarov. Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. Int. J. Sustain. Green Energy 2021, 10(1), 28-31. doi: 10.11648/j.ijrse.20211001.15

Copy | Download

AMA Style

Yodgor Аkbarovich Yusupov, Оybek Hamdamovich Оtaqulov, Sirojiddin Fayozovich Ergashev, Аkmal Аhmadaliyevich Kuchkarov. Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors. Int J Sustain Green Energy. 2021;10(1):28-31. doi: 10.11648/j.ijrse.20211001.15

Copy | Download

@article{10.11648/j.ijrse.20211001.15,
  author = {Yodgor Аkbarovich Yusupov and Оybek Hamdamovich Оtaqulov and Sirojiddin Fayozovich Ergashev and Аkmal Аhmadaliyevich Kuchkarov},
  title = {Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {10},
  number = {1},
  pages = {28-31},
  doi = {10.11648/j.ijrse.20211001.15},
  url = {https://doi.org/10.11648/j.ijrse.20211001.15},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20211001.15},
  abstract = {In the manufacture, assembly, testing and operation of solar power plants, one has to deal with a wide variety of control and measuring operations, as well as means of control and measurement of physical quantities. Analysis of methods and means of control of solar parabolic trough installations showed that they are numerous and time consuming. This requires the development of modern automated systems for measuring, recording and processing the results of the energy characteristics of solar installations. This article describes an automated stand for measuring the thermal and energy characteristics of solar parabolic trough collectors. The developed experimental setup consists of a parabolic trough collector, a measuring tank, a converter, a meter, a level gauge, temperature sensors and electric valves. Consumption (energy generated) is measured with a graduated water tank. By measuring the volume of water and the temperature passed through the solar collector, you can estimate its efficiency. Several portions of heated water are collected in the measuring tank, depending on the intensity of the heating process. As the graduated tank fills, the digital output level gauge opens the electrical drain valve. On the basis of statistical processing of experimental data, the energy characteristics of the solar parabolic trough installation are determined.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Development of an Automated Stand for Measuring the Thermal Characteristics of Solar Parabolic Trough Collectors
AU  - Yodgor Аkbarovich Yusupov
AU  - Оybek Hamdamovich Оtaqulov
AU  - Sirojiddin Fayozovich Ergashev
AU  - Аkmal Аhmadaliyevich Kuchkarov
Y1  - 2021/03/30
PY  - 2021
N1  - https://doi.org/10.11648/j.ijrse.20211001.15
DO  - 10.11648/j.ijrse.20211001.15
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 28
EP  - 31
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20211001.15
AB  - In the manufacture, assembly, testing and operation of solar power plants, one has to deal with a wide variety of control and measuring operations, as well as means of control and measurement of physical quantities. Analysis of methods and means of control of solar parabolic trough installations showed that they are numerous and time consuming. This requires the development of modern automated systems for measuring, recording and processing the results of the energy characteristics of solar installations. This article describes an automated stand for measuring the thermal and energy characteristics of solar parabolic trough collectors. The developed experimental setup consists of a parabolic trough collector, a measuring tank, a converter, a meter, a level gauge, temperature sensors and electric valves. Consumption (energy generated) is measured with a graduated water tank. By measuring the volume of water and the temperature passed through the solar collector, you can estimate its efficiency. Several portions of heated water are collected in the measuring tank, depending on the intensity of the heating process. As the graduated tank fills, the digital output level gauge opens the electrical drain valve. On the basis of statistical processing of experimental data, the energy characteristics of the solar parabolic trough installation are determined.
VL  - 10
IS  - 1
ER  -

Copy | Download