Research and Application on Bed Material Preparation System of CFB Boiler

Huang Shuzhen; Li Xinsheng

doi:doi:10.11648/j.ijepe.20200906.13

| Peer-Reviewed

Research and Application on Bed Material Preparation System of CFB Boiler

Huang Shuzhen, Li Xinsheng

Published in International Journal of Energy and Power Engineering (Volume 9, Issue 6)

Received: 7 December 2020 Accepted: 22 December 2020 Published: 31 December 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper introduces a technology of preparing bed material with bottom slag of circulating fluidized bed boiler, and designs the system of filling the bed material into the furnace, which has been applied in engineering. This technology uses bottom slag to prepare bed material. Through screening treatment of developed ultra-fine roller screen, the bed material with particle size meeting combustion requirements is prepared and fed into fluidized bed furnace. It not only ensures the combustion effect of the boiler, but also saves a lot of bed material procurement and operation costs, at the same time, it reduces the discharge of boiler bottom slag, which is conducive to reducing pollutant emission. Moreover, some limestone which is not involved in the desulfurization reaction in the furnace is screened out and returned to the furnace again as bed material, so as to improve the utilization rate of limestone powder. The success of this system in engineering application provides a low-cost and reliable new bed material preparation and filling method for the industry, and provides a reliable guarantee for the combustion of CFB boilers. The system meets the requirements of energy conservation and environmental protection, enriches the auxiliary system of CFB boiler, improves the supporting level of auxiliary system of CFB boiler, and further promotes the application of clean combustion fluidized bed unit.

Published in	International Journal of Energy and Power Engineering (Volume 9, Issue 6)
DOI	10.11648/j.ijepe.20200906.13
Page(s)	108-114
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Bed Material, Bottom Slag, Bed Materials Feeding System, Ultra-fine Roller Screen, Energy Conservation and Environmental Protection

References

[1]	ZHENG Hefei. Study on the 600 MW supercritical circulating fluidized bed boiler system [J], Energy and Energy Conservation, 2015 (12): 70-71.
[2]	YUE Guangxi, LU Junfu, XU Peng, et al. The up-to-date development and future of circulating fluidized bed combustion technology [J]. Electric Power, 2016, 49 (1): 5-17.
[3]	HUANG Zhong, YANG Juan, CHE Defu. Application and development of large-scale circulating fluidized bed boiler [J]. Thermal Power Generation, 2019 (6): 1-8.
[4]	WANG Zhi-qiang. How to control of circulating fluidized bed boiler bed temperature [J]. Shanxi Architecture, 2013, 39 (7): 139-141.
[5]	Zhao Chenyang. Importance of bed material size for circulating fluidized bed boilers [C]. Papers on Technical Exchange Service Collaboration Network of CFB Units in National Electric Power Industry, 2006, (4).
[6]	SI Junlong, JI Hui. The influence of bed material size on CFB boiler operation. China Electric Power Science and Technology Network. 2009, (2).
[7]	Yanjin, Lu Xiaofeng, Wang Quanhai et al. [J] Furnace test on combustion uniformity in dilute phase zone of 600 MW supercritical CFB boiler [J]. Journal of Electrical Engineering of China. 2018, 2 (1): 64-72.
[8]	ZHONG Weihong, LIU Zhaoxiang, WANG Lehua. Optimization of feeding mode for CFB boiler [J]. Electric safety technology, 2012 (8): 21-22.
[9]	LIU Jinbo, LIU Yu, DU Zhengyu. The approach to the start- up material systemof CFB boiler [J]. Central China Electric Power, 2006, 19 (1): 55-58.
[10]	WEN Bangchun, LIU Shuying. Modern vibration screening technology and equipment design [M]. Beijing: Metallurgical Industry Press, 2013.
[11]	DL/T 1374-2014 ROLLER SCREEN [S].
[12]	LIU Xitao. Design of Bamana -shape rolling shaft sieve and determination of main parameters [J]. Electric Power Construction, 2000, 21 (6): 31-34.
[13]	ZHAO Huanshuai. Progress and research direction of dry deep screening technology of fine grained coal [J]. Clean Coal Technology, 2019 (5): 28-34
[14]	DING Yanfeng, LI Xinsheng, JIANG Li, et al. Experimental research on the turbulence dual-tube pneumatic cinder delivery technology [J]. Electric Power, 41 (10): 53-56.
[15]	ZHANG Zhanxin, Study on material and processing technology of alumina ceramic substrate [D]. Hebei: Hebei University of Technology, 2006.

Cite This Article

Plain Text BibTeX RIS

APA Style

Huang Shuzhen, Li Xinsheng. (2020). Research and Application on Bed Material Preparation System of CFB Boiler. International Journal of Energy and Power Engineering, 9(6), 108-114. https://doi.org/10.11648/j.ijepe.20200906.13

Copy | Download

ACS Style

Huang Shuzhen; Li Xinsheng. Research and Application on Bed Material Preparation System of CFB Boiler. Int. J. Energy Power Eng. 2020, 9(6), 108-114. doi: 10.11648/j.ijepe.20200906.13

Copy | Download

AMA Style

Huang Shuzhen, Li Xinsheng. Research and Application on Bed Material Preparation System of CFB Boiler. Int J Energy Power Eng. 2020;9(6):108-114. doi: 10.11648/j.ijepe.20200906.13

Copy | Download

@article{10.11648/j.ijepe.20200906.13,
  author = {Huang Shuzhen and Li Xinsheng},
  title = {Research and Application on Bed Material Preparation System of CFB Boiler},
  journal = {International Journal of Energy and Power Engineering},
  volume = {9},
  number = {6},
  pages = {108-114},
  doi = {10.11648/j.ijepe.20200906.13},
  url = {https://doi.org/10.11648/j.ijepe.20200906.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20200906.13},
  abstract = {This paper introduces a technology of preparing bed material with bottom slag of circulating fluidized bed boiler, and designs the system of filling the bed material into the furnace, which has been applied in engineering. This technology uses bottom slag to prepare bed material. Through screening treatment of developed ultra-fine roller screen, the bed material with particle size meeting combustion requirements is prepared and fed into fluidized bed furnace. It not only ensures the combustion effect of the boiler, but also saves a lot of bed material procurement and operation costs, at the same time, it reduces the discharge of boiler bottom slag, which is conducive to reducing pollutant emission. Moreover, some limestone which is not involved in the desulfurization reaction in the furnace is screened out and returned to the furnace again as bed material, so as to improve the utilization rate of limestone powder. The success of this system in engineering application provides a low-cost and reliable new bed material preparation and filling method for the industry, and provides a reliable guarantee for the combustion of CFB boilers. The system meets the requirements of energy conservation and environmental protection, enriches the auxiliary system of CFB boiler, improves the supporting level of auxiliary system of CFB boiler, and further promotes the application of clean combustion fluidized bed unit.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Research and Application on Bed Material Preparation System of CFB Boiler
AU  - Huang Shuzhen
AU  - Li Xinsheng
Y1  - 2020/12/31
PY  - 2020
N1  - https://doi.org/10.11648/j.ijepe.20200906.13
DO  - 10.11648/j.ijepe.20200906.13
T2  - International Journal of Energy and Power Engineering
JF  - International Journal of Energy and Power Engineering
JO  - International Journal of Energy and Power Engineering
SP  - 108
EP  - 114
PB  - Science Publishing Group
SN  - 2326-960X
UR  - https://doi.org/10.11648/j.ijepe.20200906.13
AB  - This paper introduces a technology of preparing bed material with bottom slag of circulating fluidized bed boiler, and designs the system of filling the bed material into the furnace, which has been applied in engineering. This technology uses bottom slag to prepare bed material. Through screening treatment of developed ultra-fine roller screen, the bed material with particle size meeting combustion requirements is prepared and fed into fluidized bed furnace. It not only ensures the combustion effect of the boiler, but also saves a lot of bed material procurement and operation costs, at the same time, it reduces the discharge of boiler bottom slag, which is conducive to reducing pollutant emission. Moreover, some limestone which is not involved in the desulfurization reaction in the furnace is screened out and returned to the furnace again as bed material, so as to improve the utilization rate of limestone powder. The success of this system in engineering application provides a low-cost and reliable new bed material preparation and filling method for the industry, and provides a reliable guarantee for the combustion of CFB boilers. The system meets the requirements of energy conservation and environmental protection, enriches the auxiliary system of CFB boiler, improves the supporting level of auxiliary system of CFB boiler, and further promotes the application of clean combustion fluidized bed unit.
VL  - 9
IS  - 6
ER  -

Copy | Download

Author Information

Huang Shuzhen

Beijing Guodian Futong Science and Technology Development Co., Ltd., Beijing, China
Li Xinsheng

Beijing Guodian Futong Science and Technology Development Co., Ltd., Beijing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Huang Shuzhen, Li Xinsheng. (2020). Research and Application on Bed Material Preparation System of CFB Boiler. International Journal of Energy and Power Engineering, 9(6), 108-114. https://doi.org/10.11648/j.ijepe.20200906.13

Copy | Download

ACS Style

Huang Shuzhen; Li Xinsheng. Research and Application on Bed Material Preparation System of CFB Boiler. Int. J. Energy Power Eng. 2020, 9(6), 108-114. doi: 10.11648/j.ijepe.20200906.13

Copy | Download

AMA Style

Huang Shuzhen, Li Xinsheng. Research and Application on Bed Material Preparation System of CFB Boiler. Int J Energy Power Eng. 2020;9(6):108-114. doi: 10.11648/j.ijepe.20200906.13

Copy | Download

@article{10.11648/j.ijepe.20200906.13,
  author = {Huang Shuzhen and Li Xinsheng},
  title = {Research and Application on Bed Material Preparation System of CFB Boiler},
  journal = {International Journal of Energy and Power Engineering},
  volume = {9},
  number = {6},
  pages = {108-114},
  doi = {10.11648/j.ijepe.20200906.13},
  url = {https://doi.org/10.11648/j.ijepe.20200906.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20200906.13},
  abstract = {This paper introduces a technology of preparing bed material with bottom slag of circulating fluidized bed boiler, and designs the system of filling the bed material into the furnace, which has been applied in engineering. This technology uses bottom slag to prepare bed material. Through screening treatment of developed ultra-fine roller screen, the bed material with particle size meeting combustion requirements is prepared and fed into fluidized bed furnace. It not only ensures the combustion effect of the boiler, but also saves a lot of bed material procurement and operation costs, at the same time, it reduces the discharge of boiler bottom slag, which is conducive to reducing pollutant emission. Moreover, some limestone which is not involved in the desulfurization reaction in the furnace is screened out and returned to the furnace again as bed material, so as to improve the utilization rate of limestone powder. The success of this system in engineering application provides a low-cost and reliable new bed material preparation and filling method for the industry, and provides a reliable guarantee for the combustion of CFB boilers. The system meets the requirements of energy conservation and environmental protection, enriches the auxiliary system of CFB boiler, improves the supporting level of auxiliary system of CFB boiler, and further promotes the application of clean combustion fluidized bed unit.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Research and Application on Bed Material Preparation System of CFB Boiler
AU  - Huang Shuzhen
AU  - Li Xinsheng
Y1  - 2020/12/31
PY  - 2020
N1  - https://doi.org/10.11648/j.ijepe.20200906.13
DO  - 10.11648/j.ijepe.20200906.13
T2  - International Journal of Energy and Power Engineering
JF  - International Journal of Energy and Power Engineering
JO  - International Journal of Energy and Power Engineering
SP  - 108
EP  - 114
PB  - Science Publishing Group
SN  - 2326-960X
UR  - https://doi.org/10.11648/j.ijepe.20200906.13
AB  - This paper introduces a technology of preparing bed material with bottom slag of circulating fluidized bed boiler, and designs the system of filling the bed material into the furnace, which has been applied in engineering. This technology uses bottom slag to prepare bed material. Through screening treatment of developed ultra-fine roller screen, the bed material with particle size meeting combustion requirements is prepared and fed into fluidized bed furnace. It not only ensures the combustion effect of the boiler, but also saves a lot of bed material procurement and operation costs, at the same time, it reduces the discharge of boiler bottom slag, which is conducive to reducing pollutant emission. Moreover, some limestone which is not involved in the desulfurization reaction in the furnace is screened out and returned to the furnace again as bed material, so as to improve the utilization rate of limestone powder. The success of this system in engineering application provides a low-cost and reliable new bed material preparation and filling method for the industry, and provides a reliable guarantee for the combustion of CFB boilers. The system meets the requirements of energy conservation and environmental protection, enriches the auxiliary system of CFB boiler, improves the supporting level of auxiliary system of CFB boiler, and further promotes the application of clean combustion fluidized bed unit.
VL  - 9
IS  - 6
ER  -

Copy | Download