| Peer-Reviewed

The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process

Received: 19 February 2019     Accepted: 28 March 2019     Published: 16 August 2019
Views:       Downloads:
Abstract

This article reviews and analyzes the advantages and disadvantages of alternative solar energy and the use of solar panels in this process. The solar energy that is falling on the photoelements under a certain angle depends on environmental climax, season, and location. Atmospheric changes also lead to changes in the transverse and direct rays of light, which does not change the light, spectrum and intensity of falling light. These changes will change the principle of operation of the QES. Also, suggestions and recommendations regarding the risks of using solar panels are provided. Moto electric devices work full time in the morning and in the evening at low power. But the highest power supply is late at night. In addition, the energy generated dramatically changes rapidly due to weather changes. In order to eliminate these shortcomings, the AES uses electric accumulators, or it can be used to transfer energy to other types of energy, and it is also used for hydraulic accumulator stations or hydrogen power. At present, the problem is solved by building a common energy system.

Published in American Journal of Software Engineering and Applications (Volume 8, Issue 1)
DOI 10.11648/j.ajsea.20190801.14
Page(s) 32-35
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Alternative Energy, Solar Panels, Atmosphere, Photoelectric Elements, Photoconductor Devices

References
[1] Sergio Daher, Jurgen Schmid and Fernando L. M Antunes, “Multilevel Inverter Topologies for Stand-Alone PV Systems” IEEE Transactions on Industrial Electronics. Vol. 55, No. 7, July 2008.
[2] J. Surya Kumari and Ch. Sai Babu “Mathematical Modeling and Simulation of Photovoltaic Cell using Matlab-Simulink Environment” International Journal of Electrical and Computer Engineering (IJECE) Vol. 2, No. 1, February 2012, pp. 26~34 ISSN: 2088-8708.
[3] J. A. Gow and C. D. Manning, Development of a photovoltaic array model for use in power-electronics simulation studies, IEE Proceedings – Electric Power Applications, 146 (1999), 193–200.
[4] E. I. Ortiz-Rivera and F. Z. Peng, Analytical model for a photovoltaic module using the electrical characteristics provided by the manufacturer data sheet, in 36th IEEE Power Electronics Specialists Conference (PESC ’05), Recife, Brazil, 2005, 2087–2091.
[5] V. P. Sethi, K. Sumathy, S. Yuvarajan, and D. S. Pal “Mathematical Model for Computing Maximum Power Output of a PV Solar Module and Experimental Validation” Ashdin Publishing Journal of Fundamentals of Renewable Energy and Applications Vol. 2 (2012), Article ID R120312, 5 pages doi: 10.4303/jfrea/R120312.
[6] Hiren Patel and Vivek Agarwal, “MATLAB-Based Modeling to Study the Effects of Partial Shading on PV Array Characteristics”, IEEE TRANSACTIONS ON ENERGY CONVERSION, VOL 23, NO 1, MARCH 2008.
[7] European Photovoltaic Industry Association. Global Market Outlook for Photovoltaic’s Until 2016 May 2012. P. 11.
[8] F. Nayan, M. Islam and S. Mahmud, "Feasibility Study of Smart Grid in Bangladesh," Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 1531-1535. doi: 10.4236/epe.2013.54B290.
[9] T. Hasan, M. F. Nayan, M. A. Iqbal, M. Islam, “Smart Solar Home System with Safety Device Low Voltage Alert”, UKSim 14th International Conference on Modelling and Simulation, Pages 201-204, ISBN: 978-0-7695-4682-7.
[10] R. Bhol, A. Pradhan, ‘Environmental Effect Assessment On Performance of Solar Pv Panel”, 2015 International Conference On Circuit, Power And Computing Technologies [ICCPCT].
[11] V. Khanna, B. K. Das, D. Bisht,” Matlab/Simelectronics Models Based Study Of Solar Cells”, International Journal Of Renewable Energy Research, Vol. 3, No. 1, 2013.
[12] M. A. Islam, N. Mohammad, P. K. S. Khan,” Modeling and Performance Analysis of a Generalized Photovoltaic Array in Matlab”, Proceedings of 29th annual IEEE Power Electronics Specialists Conference, vol. 1, pp. 86-93, 1998.
[13] S. Hegedus, and A. Luque, Achievements and Challenges of Solar Electricity from Photovoltaics. Handbook of Photovoltaic Science and Engineering (Second edition). p. 4-5.
[14] European photovoltaic industry association. Solar generation 6: solar photovoltaic electricity empowering the world, 2011. p. 10.
[15] M. Bouzguenda, T. Salmi, A. Gastli and A. Masmoudi,” Evaluating Solar Photovoltaic System Performance using MATLAB”, 2012 First International Conference on Renewable Energies and Vehicular Technology in IEEE.
[16] R. Krishan, Y. Raj Sood, B. U. Kumar, “The Simulation and Design for Analysis of Photovoltaic System Based on MATLAB” 2013 International Conference on Energy Efficient Technologies for Sustainability (ICEETS, IEEE 2013, 978-1-4673-6150-7).
[17] T. Salmi, M. Bouzguenda, A. Gastli, A. Masmoudi, ”MATLAB/Simulink Based Modelling of Solar Photovoltaic Cell”, International Journal Of Renewable Energy Research, Vol. 2, No. 2, 2012.
[18] D. Bonkoungou, Z. Koalaga, D. Njomo,” Modelling and Simulation of photovoltaic module considering single-diode equivalent circuit model in MATLAB”, International Journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 3, March 2013.
Cite This Article
  • APA Style

    Tulakov Jakhongir Turakul Ugli. (2019). The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process. American Journal of Software Engineering and Applications, 8(1), 32-35. https://doi.org/10.11648/j.ajsea.20190801.14

    Copy | Download

    ACS Style

    Tulakov Jakhongir Turakul Ugli. The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process. Am. J. Softw. Eng. Appl. 2019, 8(1), 32-35. doi: 10.11648/j.ajsea.20190801.14

    Copy | Download

    AMA Style

    Tulakov Jakhongir Turakul Ugli. The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process. Am J Softw Eng Appl. 2019;8(1):32-35. doi: 10.11648/j.ajsea.20190801.14

    Copy | Download

  • @article{10.11648/j.ajsea.20190801.14,
      author = {Tulakov Jakhongir Turakul Ugli},
      title = {The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process},
      journal = {American Journal of Software Engineering and Applications},
      volume = {8},
      number = {1},
      pages = {32-35},
      doi = {10.11648/j.ajsea.20190801.14},
      url = {https://doi.org/10.11648/j.ajsea.20190801.14},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajsea.20190801.14},
      abstract = {This article reviews and analyzes the advantages and disadvantages of alternative solar energy and the use of solar panels in this process. The solar energy that is falling on the photoelements under a certain angle depends on environmental climax, season, and location. Atmospheric changes also lead to changes in the transverse and direct rays of light, which does not change the light, spectrum and intensity of falling light. These changes will change the principle of operation of the QES. Also, suggestions and recommendations regarding the risks of using solar panels are provided. Moto electric devices work full time in the morning and in the evening at low power. But the highest power supply is late at night. In addition, the energy generated dramatically changes rapidly due to weather changes. In order to eliminate these shortcomings, the AES uses electric accumulators, or it can be used to transfer energy to other types of energy, and it is also used for hydraulic accumulator stations or hydrogen power. At present, the problem is solved by building a common energy system.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Importance of Alternative Solar Energy Sources and the Advantages and Disadvantages of Using Solar Panels in this Process
    AU  - Tulakov Jakhongir Turakul Ugli
    Y1  - 2019/08/16
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajsea.20190801.14
    DO  - 10.11648/j.ajsea.20190801.14
    T2  - American Journal of Software Engineering and Applications
    JF  - American Journal of Software Engineering and Applications
    JO  - American Journal of Software Engineering and Applications
    SP  - 32
    EP  - 35
    PB  - Science Publishing Group
    SN  - 2327-249X
    UR  - https://doi.org/10.11648/j.ajsea.20190801.14
    AB  - This article reviews and analyzes the advantages and disadvantages of alternative solar energy and the use of solar panels in this process. The solar energy that is falling on the photoelements under a certain angle depends on environmental climax, season, and location. Atmospheric changes also lead to changes in the transverse and direct rays of light, which does not change the light, spectrum and intensity of falling light. These changes will change the principle of operation of the QES. Also, suggestions and recommendations regarding the risks of using solar panels are provided. Moto electric devices work full time in the morning and in the evening at low power. But the highest power supply is late at night. In addition, the energy generated dramatically changes rapidly due to weather changes. In order to eliminate these shortcomings, the AES uses electric accumulators, or it can be used to transfer energy to other types of energy, and it is also used for hydraulic accumulator stations or hydrogen power. At present, the problem is solved by building a common energy system.
    VL  - 8
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Electric Power Industry, Faculty of Electromechanics and Radioelectronics, Jizzakh Polytecnic Institute, Jizzakh, Uzbekistan

  • Sections