Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling

Hideaki Tsukamoto

doi:doi:10.11648/j.ajpc.20170605.13

| Peer-Reviewed

Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling

Hideaki Tsukamoto

Published in American Journal of Physical Chemistry (Volume 6, Issue 5)

Received: 13 March 2017 Accepted: 23 March 2017 Published: 28 November 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This study aims to fabricate aluminum (A1050)/ duralumin (A2017) multi-layered structures with interface composition gradient by hot rolling, and investigate their nanoindentation properties, and macro-mechanical property such as damping. 2- and 6-layered aluminum/ duralumin graded structures with asymmetric lay-ups from one side of aluminum to another side of duralumin have been fabricated, which suffer from three different heat-treatments such as (1) as-rolled (no heat-treatment), (2) annealed at 400°C and (3) homogenized at 500°C followed by water quenching and aging (T4 heat treatment). Nanoindentation demonstrated higher hardness and elastic modulus correspond to higher Cu content in annealed and aged samples. Duralumin in annealed samples shows much lower hardness and elastic modulus than those in as-rolled and aged ones. For damping properties, 2-layered graded structures show higher values than 6-layered graded structures, which are lower than single layers of aluminum.

Published in	American Journal of Physical Chemistry (Volume 6, Issue 5)
DOI	10.11648/j.ajpc.20170605.13
Page(s)	97-102
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Multi-Layered Structures, Functionally Graded Materials (FGMs), Internal Friction, Nanoindentation

References

[1]	J. E. Lee, D. H. Bae and W. S. Chung, “Effects of annealing on the mechanical and interface properties of stainless steel/aluminum /copper clad-metal sheets,” J Mater Process Technol, 2007, vol. 187-188, pp. 546-549.
[2]	Y. M. Hwang, H. H. Hsu and Y. L. Hwang, “Analytical and Experimental Study on Bonding Behaviour at the Roll Gap During Complex Rolling of Sandwich Sheets,” Int. J. Mech. Science, 2000, vol. 42, pp. 2417-2437.
[3]	X. P. Zhang, T. H. Yang, J. Q. Liu, X. F. Luo and J. T. Wang, “Mechanical properties of an Al/Mg/Al trilaminated composite fabricated by hot rolling,” J Mater Sci, 2010, vol. 45, pp. 3457-3464.
[4]	L. Chen, B. Jha, Z. Yang, G. G. Xia, J. W. Stevenson and P. Singh, “Clad Metals by Roll Bonding for SOFC Interconnects,” J Mater Eng Perform, 2006, vol. 15, pp. 399-403.
[5]	P. Mallesham, A. A. Gokhale and A. Dutta, “Interface microstructure and bond shear strength of aluminum alloy AA8090/AA7072 roll clad sheets,” J Mater Sci Lett, 2003, vol. 22, pp. 1793-1795.
[6]	I. J. Polmear, “Light Alloys, The Metallurgy of the Light Metals,” 3 rd ed. (Arnold Publishers, London, 1995) vol. 331, pp. 77.
[7]	M. Fujikane, D. Setoyama and S. Nagao, “Nanoindentation examination of yttria stabilized zirconia (YSZ) crystal," J Alloy Compound, 2007, vol. 431, pp. 250-255.
[8]	F. Gao, T. Takemoto, “Mechanical properties evolution of Sn-3.5Ag based lead-free solders bynanoindentation,” Materials Letters, 2006, vol. 60, pp. 2315-2318.
[9]	R. Gibson, “Damping characteristics of composite materials and structures,” J. Materials Engineering and Performance, 1992, vol. 1, pp. 11-20.
[10]	A. L. Araújo, P. Martins, C. M. Mota Soares, C. A. Mota Soares, J. Herskovits, “Damping optimization of viscoelastic laminated sandwich composite structures,” Structural and Multidisciplinary Optimization, 2009, vol. 39, pp. 569-579.
[11]	Z. Li, Y. L. Jia, N. Tang, M. Fang, N. Liu, “A novel laminate combined with elasticity and damping,” Journal of Materials Processing Technology, 2007, vol. 182, pp. 1-5.
[12]	D. J. Lee, D-H. Ahn, E. Y. Yoon, S. I. Hong, S. Lee and H. S. Kim, “Estimating interface bonding strength in clad metals using digital image correlation,” Scripta Materialia, 2013, vol. 68, pp. 893-896.
[13]	M. Kameyama, M. Arai, “Optimal design of symmetrically laminated plates for damping characteristics using lamination parameters,” Composite Structures, 2015, vol. 132, pp. 885-897.
[14]	G. Demeshkin, M. E. Kozeko, V. M. Kornev, and V. D. Kurguzov, “Damping characteristics of composite structural materials fabricated by winding,” Journal of Applied Mechanics and Technical Physics, 2001, vol. 42, pp. 169-173.
[15]	P. Cupial and J. Niziol, “Vibration and damping analysis of a three-layered composite plate with a viscoelastic mid-layer,” J. Sound Vibration, 1995, vol. 183, pp. 99-114.
[16]	J. Gao and Y. Shen, “Vibration and damping analysis of a composite plate with active and passive damping layer,” Applied Math Mech, 1999, vol. 20, pp. 1075-1086.
[17]	J. Zhang, R. J. Perez, E. J. Lavernia, “Documentation of damping capacity of metallic, ceramic and metal-matrix composite materials,” J Mater Sci, 1993, vol. 28, pp. 2395-2404.

Cite This Article

Plain Text BibTeX RIS

APA Style

Hideaki Tsukamoto. (2017). Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. American Journal of Physical Chemistry, 6(5), 97-102. https://doi.org/10.11648/j.ajpc.20170605.13

Copy | Download

ACS Style

Hideaki Tsukamoto. Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. Am. J. Phys. Chem. 2017, 6(5), 97-102. doi: 10.11648/j.ajpc.20170605.13

Copy | Download

AMA Style

Hideaki Tsukamoto. Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. Am J Phys Chem. 2017;6(5):97-102. doi: 10.11648/j.ajpc.20170605.13

Copy | Download

@article{10.11648/j.ajpc.20170605.13,
  author = {Hideaki Tsukamoto},
  title = {Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling},
  journal = {American Journal of Physical Chemistry},
  volume = {6},
  number = {5},
  pages = {97-102},
  doi = {10.11648/j.ajpc.20170605.13},
  url = {https://doi.org/10.11648/j.ajpc.20170605.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpc.20170605.13},
  abstract = {This study aims to fabricate aluminum (A1050)/ duralumin (A2017) multi-layered structures with interface composition gradient by hot rolling, and investigate their nanoindentation properties, and macro-mechanical property such as damping. 2- and 6-layered aluminum/ duralumin graded structures with asymmetric lay-ups from one side of aluminum to another side of duralumin have been fabricated, which suffer from three different heat-treatments such as (1) as-rolled (no heat-treatment), (2) annealed at 400°C and (3) homogenized at 500°C followed by water quenching and aging (T4 heat treatment). Nanoindentation demonstrated higher hardness and elastic modulus correspond to higher Cu content in annealed and aged samples. Duralumin in annealed samples shows much lower hardness and elastic modulus than those in as-rolled and aged ones. For damping properties, 2-layered graded structures show higher values than 6-layered graded structures, which are lower than single layers of aluminum.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling
AU  - Hideaki Tsukamoto
Y1  - 2017/11/28
PY  - 2017
N1  - https://doi.org/10.11648/j.ajpc.20170605.13
DO  - 10.11648/j.ajpc.20170605.13
T2  - American Journal of Physical Chemistry
JF  - American Journal of Physical Chemistry
JO  - American Journal of Physical Chemistry
SP  - 97
EP  - 102
PB  - Science Publishing Group
SN  - 2327-2449
UR  - https://doi.org/10.11648/j.ajpc.20170605.13
AB  - This study aims to fabricate aluminum (A1050)/ duralumin (A2017) multi-layered structures with interface composition gradient by hot rolling, and investigate their nanoindentation properties, and macro-mechanical property such as damping. 2- and 6-layered aluminum/ duralumin graded structures with asymmetric lay-ups from one side of aluminum to another side of duralumin have been fabricated, which suffer from three different heat-treatments such as (1) as-rolled (no heat-treatment), (2) annealed at 400°C and (3) homogenized at 500°C followed by water quenching and aging (T4 heat treatment). Nanoindentation demonstrated higher hardness and elastic modulus correspond to higher Cu content in annealed and aged samples. Duralumin in annealed samples shows much lower hardness and elastic modulus than those in as-rolled and aged ones. For damping properties, 2-layered graded structures show higher values than 6-layered graded structures, which are lower than single layers of aluminum.
VL  - 6
IS  - 5
ER  -

Copy | Download

Author Information

Hideaki Tsukamoto

Department of Mechanical Engineering, Faculty of Science and Engineering, Hosei University, Tokyo, Japan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hideaki Tsukamoto. (2017). Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. American Journal of Physical Chemistry, 6(5), 97-102. https://doi.org/10.11648/j.ajpc.20170605.13

Copy | Download

ACS Style

Hideaki Tsukamoto. Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. Am. J. Phys. Chem. 2017, 6(5), 97-102. doi: 10.11648/j.ajpc.20170605.13

Copy | Download

AMA Style

Hideaki Tsukamoto. Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling. Am J Phys Chem. 2017;6(5):97-102. doi: 10.11648/j.ajpc.20170605.13

Copy | Download

@article{10.11648/j.ajpc.20170605.13,
  author = {Hideaki Tsukamoto},
  title = {Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling},
  journal = {American Journal of Physical Chemistry},
  volume = {6},
  number = {5},
  pages = {97-102},
  doi = {10.11648/j.ajpc.20170605.13},
  url = {https://doi.org/10.11648/j.ajpc.20170605.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpc.20170605.13},
  abstract = {This study aims to fabricate aluminum (A1050)/ duralumin (A2017) multi-layered structures with interface composition gradient by hot rolling, and investigate their nanoindentation properties, and macro-mechanical property such as damping. 2- and 6-layered aluminum/ duralumin graded structures with asymmetric lay-ups from one side of aluminum to another side of duralumin have been fabricated, which suffer from three different heat-treatments such as (1) as-rolled (no heat-treatment), (2) annealed at 400°C and (3) homogenized at 500°C followed by water quenching and aging (T4 heat treatment). Nanoindentation demonstrated higher hardness and elastic modulus correspond to higher Cu content in annealed and aged samples. Duralumin in annealed samples shows much lower hardness and elastic modulus than those in as-rolled and aged ones. For damping properties, 2-layered graded structures show higher values than 6-layered graded structures, which are lower than single layers of aluminum.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Damping Properties of Aluminum/ Duralumin Multi-Layered Graded Structures Fabricated by Hot Rolling
AU  - Hideaki Tsukamoto
Y1  - 2017/11/28
PY  - 2017
N1  - https://doi.org/10.11648/j.ajpc.20170605.13
DO  - 10.11648/j.ajpc.20170605.13
T2  - American Journal of Physical Chemistry
JF  - American Journal of Physical Chemistry
JO  - American Journal of Physical Chemistry
SP  - 97
EP  - 102
PB  - Science Publishing Group
SN  - 2327-2449
UR  - https://doi.org/10.11648/j.ajpc.20170605.13
AB  - This study aims to fabricate aluminum (A1050)/ duralumin (A2017) multi-layered structures with interface composition gradient by hot rolling, and investigate their nanoindentation properties, and macro-mechanical property such as damping. 2- and 6-layered aluminum/ duralumin graded structures with asymmetric lay-ups from one side of aluminum to another side of duralumin have been fabricated, which suffer from three different heat-treatments such as (1) as-rolled (no heat-treatment), (2) annealed at 400°C and (3) homogenized at 500°C followed by water quenching and aging (T4 heat treatment). Nanoindentation demonstrated higher hardness and elastic modulus correspond to higher Cu content in annealed and aged samples. Duralumin in annealed samples shows much lower hardness and elastic modulus than those in as-rolled and aged ones. For damping properties, 2-layered graded structures show higher values than 6-layered graded structures, which are lower than single layers of aluminum.
VL  - 6
IS  - 5
ER  -

Copy | Download